Skip to content
AllTrax Grading & Excavating logo
Call
Excavator bucket cutting a drainage trench across a Western NC property

Erosion Control & Drainage Solutions in Western North Carolina

Is rain washing away your property? Culverts, ditches, swales, riprap and resloping that send water where it belongs.

Erosion is the last thing you want to deal with, and it rarely announces itself politely. We use a range of prevention methods to keep properties across Morganton, Union Mills, Asheville and the surrounding areas in good shape, and we fix the ones where the water's already won.

Already had an erosion problem? We can reslope the property and follow up with control measures so it actually holds this time. Need a wide culvert to funnel water away from a structure, or a series of ditches to contain and route runoff? Either way, we'll take it on.

Western North Carolina gets a lot of rain — fast, heavy, and on a lot of slope. That combination moves soil, plain and simple. Controlling it means giving the water a defined path with something durable in the way, not just hoping the grass holds.

Why AllTrax

Why work with us on erosion control

We treat the cause, not just the symptom

A washed-out bank is the evidence, not the problem. The real fix is upslope, wherever the water's actually coming from.

Culverts sized right, not sized easy

An undersized culvert is worse than none. It backs water up and blows out the fill above it. We size for the drainage area, not for whatever pipe's convenient.

Riprap and armoring where it counts

Stone reinforcement at outlets, on cut banks, along creek edges: anywhere vegetation alone won't hold.

We know the rules, not just the dirt

North Carolina's erosion and sedimentation control requirements, and what actually triggers them on a land-disturbing project. We stay on top of that.

Built into the grading, not bolted on

Because we do the grading too, drainage gets designed into the site from the start instead of getting added after the water's already found the weak spot.

Scope of work

Our erosion control services

Everything below is handled by our own crew and equipment.

Culvert installation & replacement

Installing new culverts and replacing crushed, rusted or undersized pipe, including driveway crossings and road culverts.

Ditching & ditch cleaning

Cutting new ditches to carry runoff and re-opening ditches that have filled in with sediment and growth.

Bank resloping & stabilization

Re-cutting failed or over-steep banks to a stable angle and armoring or seeding them so they stay.

Riprap & stone armoring

Placing rock at culvert outlets, on slopes and along creek banks to reinforce the slope while letting water drain properly.

Swales & surface drainage

Shaping broad, shallow channels that move sheet flow across a site without cutting into it.

French drains & subsurface drainage

Perforated pipe in stone to intercept groundwater and relieve saturated ground around foundations and drain fields.

Creek bank repair

Repairing and reinforcing eroding creek banks with stone and grading to slow the loss of property.

Silt fence & construction erosion control

Temporary measures required during land-disturbing work to keep sediment on your site.

Our work

Erosion Control projects

Photos from our own job sites across Western North Carolina.

Open drainage trench excavated through red clay ahead of pipe installation
Before and after of an eroded bank resloped and stabilized by AllTrax
Excavator bucket cutting a drainage trench across a Western NC property
Washed-out gravel driveway with standing water and rutting before repair

Service area

Erosion Control across Western North Carolina

We handle erosion control and drainage work in these markets. Each page covers the terrain, soils and county rules where you are.

Outside these towns? See the full service area — and call anyway if you are just past the edge of it.

Answers

Erosion Control questions

How much does erosion control cost?

Depends on the scale of the problem, honestly. Cleaning and re-cutting ditches often runs $500 to $2,000. A properly installed driveway culvert with a headwall and outlet protection is commonly $1,500 to $4,000. Resloping and armoring a failed bank with riprap depends on length and stone quantity, and typically starts around $3,000. We price it off a site walk.

What size culvert do I need for my driveway?

Depends on how much land drains to that point, the slope, and the ditch depth you've got. Fifteen inches is a common minimum for a residential driveway crossing, but plenty of sites need eighteen to twenty-four inches or bigger. Undersizing's the most common mistake we run into, and it's exactly what causes the fill over the pipe to wash out.

How do I stop water running down my driveway?

Three fixes, usually working together: re-crown the driveway so water sheds sideways instead of running its length, cut or clean the ditch alongside it so that water has somewhere to actually go, and put water bars or a cross culvert on long steep runs to break the flow up before it gets moving fast enough to cut.

Do I need an erosion control permit in North Carolina?

North Carolina requires an approved erosion and sedimentation control plan for land-disturbing activity that disturbs one acre or more. Some counties and municipalities set the bar lower, and steep slope or watershed protection overlays add requirements on top of that. We'll flag what applies to your project during the estimate.

Will grass alone hold a slope?

On a gentle slope with reasonable runoff, established vegetation works well and it's the cheapest long-term answer, so use it there. On steep cuts, at culvert outlets, along creeks, anywhere flow concentrates — no. Water gets underneath it and takes the whole mat with it. Those spots need stone, matting, or something structural.

Need erosion control done right?

Call (828) 375-7556 or send us the details and we will get out to look at it.