
Retaining Walls & Hardscapes in Western North Carolina
Reclaim usable space from a slope, or build the outdoor area you have been picturing.
Dreaming of a patio? Trying to reclaim usable space from a slope with a retaining wall? We build hardscapes across Morganton, Union Mills, Asheville and the surrounding areas, and because we're a grading and excavation company first, everything we build sits on ground that's actually been prepared to hold it.
On the sloped lots common around here, a retaining wall is often the difference between a yard you use and a hillside you just look at. It's also a structure holding back tons of saturated soil, which is exactly why drainage behind the wall and a proper base under it matter a lot more than what the face looks like on day one. The face is the easy part.
Why AllTrax
Why work with us on hardscapes
Built by the people who grade the site
Excavation, base prep, backfill: that's what we do every single day. A wall's only as good as the ground it sits on and the drainage behind it.
Drainage behind every wall, no exceptions
Stone and pipe behind the wall, every time, so hydrostatic pressure doesn't push it over the third wet spring in.
A few material options
Segmental block, boulder, natural stone: sized and specified to the height and load you actually need, not whatever looks good in a catalog.
Design help, not just labor
We work through layout, elevation and access with you before anything gets built, so the finished space actually works the way you'll use it.
Creek and bank work too
Stone work along creek banks that stabilizes the edge and, honestly, looks like it's supposed to be there.
Scope of work
Our hardscapes services
Everything below is handled by our own crew and equipment.
Retaining walls
Segmental block and engineered walls that create level, usable ground out of a slope, with proper base, backfill and drainage.
Boulder walls
Natural stone and boulder walls set with machine, for a rugged look that suits mountain property.
Patios
Poured concrete and paver patios, graded to drain away from the house.
Firepits
Built-in stone firepits and surrounds integrated into the patio layout.
Creek banks
Stabilizing and reinforcing creek edges with stone to stop the loss of ground.
Steps & terracing
Stone or block steps and terraced levels that make a steep yard navigable and usable.
Our work
Hardscapes projects
Photos from our own job sites across Western North Carolina.



Service area
Hardscapes across Western North Carolina
We handle retaining walls and hardscaping in these markets. Each page covers the terrain, soils and county rules where you are.
Outside these towns? See the full service area — and call anyway if you are just past the edge of it.
Answers
Hardscapes questions
How much does a retaining wall cost in Western NC?
Segmental block walls commonly run $35 to $65 per square foot of wall face installed, and boulder walls land in a similar range depending on stone availability and access. A wall over four feet tall generally needs engineering, which adds cost. Equipment access is often the single biggest price factor on a mountain lot.
Do I need a permit for a retaining wall in North Carolina?
Set locally, but as a general rule, walls over four feet tall (measured from the bottom of the footing) need a permit and an engineered design in most North Carolina jurisdictions. Walls supporting a driveway or a structure above them often trigger review at lower heights. We check your county before we build anything.
Why do retaining walls fail?
Nearly always water. Without drainage stone and pipe behind it, saturated soil puts enormous pressure on the back of a wall and pushes it right out. The other usual culprits: an inadequate or unlevel base, no geogrid reinforcement on a tall wall, and backfilling with the same clay that came out of the hole instead of something that actually drains.
What is the difference between a boulder wall and a block wall?
Boulder walls use large natural stones set by machine — they suit mountain property, handle irregular ground well, and need equipment access to build. Segmental block walls use manufactured units, give a more uniform finished look, and are easier to engineer to a specific height with geogrid. Cost's often comparable; it usually comes down to site access and the look you're after.
Related
Other work we handle
Most projects touch more than one of these. Doing them with one crew keeps the grades, the drainage and the schedule consistent.
Concrete
Driveways, slabs, foundations, walkways and repair — poured on a base that will hold them.
ViewSteel Buildings
One call for the building and the ground it sits on — design, grading, gravel pad, concrete slab and foundation.
ViewErosion Control
Is rain washing away your property? Culverts, ditches, swales, riprap and resloping that send water where it belongs.
ViewExcavation
Land clearing, grading and site prep for residential and commercial projects across the foothills.
ViewNeed hardscapes done right?
Call (828) 375-7556 or send us the details and we will get out to look at it.
